NJP-400C Automatic Capsule Filling Machine
It adopts the disc valve feeding method and is equipped with a vibration device.
It solves the problem that the traditional screw feeding device has no fluidity and often fails to feed powders with poor fluidity such as Chinese herbal medicines and proprietary Chinese medicines. Easy to disassemble, easy to replace and clean.
Sowing Rack
Driven by guide rail, it has high precision and long service life.
The closed design effectively prevents waste capsules and dust from entering. Good stability, orderly seeding, and accurate direction adjustment.
new turntable
One-piece processing and molding, compact structure and no splicing gap, with good sealing and easy disassembly; the upper and lower modules move independently, and the shaft seal of the fixed bracket adopts a double-lip skeleton dust-proof ring, which achieves no noise, small size, and low load. Small and high precision. The interior of the fully enclosed rotary table is free of maintenance, oil, maintenance and powder for three years.
Filling combination
Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods.
Filling base
The filling base adopts a negative pressure design, which can suck the powder in the hole of the base through negative pressure when the equipment is running, and recycle it into the powder collector. Effectively avoid the waste and loss of the powder, and realize the secondary use of the powder.
Integrated powder inhaler
When the abnormal capsule cannot be separated normally, the medicine powder entering the hole of the lower die is directly sucked into the medicine powder recovery device by the medicine powder recovery device at the filling station, which can effectively recover the medicine powder and avoid loss and waste.
Capsule lock mechanism
The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod.
Cleaning Die Hole Device
Purified compressed air and intermittent gas impingement technology are adopted. It solves the problem of powder sticking to the mold and improves the probability of capsule loading.
Powder Recycler
It adopts negative pressure technology and has an independent distribution system for powder, which can accurately recover powder and avoid cross- contamination.
The recovered powder can be directly produced again, which is convenient and efficient.
Technical Parameters:
| Specifications |
NJP-400C type |
| Maximum Capacity |
24000 pcs/hour |
| machine weight |
600kg _ |
| Machine volume |
980×710×1880mm (height with powder feeding machine: 2290mm) |
| power supply |
380/220V 50Hz |
| total power |
3kw _ |
| Number of holes |
3 holes |
| Vacuum |
20m 3 /h -0.04~-0.08MPa |
| vacuuming |
17.6Kpa 180m³/h |
| compressed air |
Air consumption 4m³/h Pressure 0.3~0.4MPa |
| working noise |
≤75dBA |
| Working temperature |
21°C±3°C |
| working relative humidity |
40-55% |
| Chance |
Empty capsule ≥ 99.9%. Full capsule ≥ 99.8% |
| Adapt Capsules |
00#-5# capsule |
| Loading accuracy |
Western medicine ± 3%. Traditional Chinese medicine ± 4% |
| Adapt to the filling range |
Powder, Granule, Pellet, Tablet |
| special function |
Powder collector function |
| Material |
316L stainless steel is used for parts in direct contact with medicines |
| specification |
Fully sign cGMP requirements |
After-sale Services
Installation
All installation with the SINOPED team (1 Engineer+1 Translator) must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled. Include tools, equipment , steam connection and electric supply needed to be prepared well .
While SINOPED team member arrives at the site for a complete and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within14 working days excluding travel days. The actual installation days may vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours..
After Service
SINOPED provide free parts and parts delivery, when manufacture defects has been detected during normal operation (vulnerable parts not included) under warranty period. We offer One YEARS warranty period time.
Beyond warranty period we offer Cost-charge accessory .
Consultant services all machine life.
About us:
LIAOYANG SINOPED INTERNATIONAL Co.,Ltd (hereafter called SINOPED) is subordinate to SINOPED (China) LIMITED,and is a manufacturer which integrates the science researching,the fabricating and the trading in one. Our corporation was originated from the first state-owned pharmaceutical machinery plant in China--Liaoyang Pharmaceutical Machinery Plant which was founded in 1947 (Later,it was reorganized as Liaoning Shuanglian Chemical & Pharmaceutical Machinery Co.,Ltd),and has been focusing on the developing & manufacturing of centrifugal/ separating machines.
We have a wealth of experience and an excellent team.
Machinery quality assurance:
All the machinery we send out to you has been subjected to rigorous quality checks and safety testing to ensure you receive a satisfactory product. All equipment has waterproof and dustproof shrink film, and some special machines are also vacuum packed.
The outside is a standard wooden box for export without fumigation, which ensures that the machine will not be damaged by moisture or collision during transportation. We also take out insurance for the equipment.
SINOPED CUSTOMER
National exhibition
){kind=link}