Automatic Liquid Plant 3 in One Glass Bottle Water Filling Machine in China

• Customization: Available
• Warranty: 1.5 Years
• Type: Juce Filling Machine
• Model NO.: Sino-CGF series
• Automatic Grade: Fully Automatic
• Material Type: Liquid
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Multi-Room Feeding
• Dosing Device: Capacity Cup
• Filling Principle: Vacuum
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Rotary
• Packaging: Plastic
• Packaging Material: Aluminum Foil
• Capacity: 20000b/H 500ml
• Washing Station: 40
• Filling Station: 40
• Capping Station: 12
• Water Pressure: 0.18-0.25MPa
• Automatic Mode: Automatic with PLC Touch Screen
• Main Material: SUS304
• Water Consumption: 4000kg/H
• Filling Precision: ≤+5mm
• Air Pressure: 0.5MPa
• Air Consumption: 0.3-0.6m3/Min
• Power: 14kw
• Weight: 8500kg
• Transport Package: Wooden
• Specification: 4600*2200*2300mm
• Trademark: Sinoped
• Origin: China
• Production Capacity: 100000bottle/Years

Product Description

Basic performance characteristics

The equipment is used in production of beer/carbonated drink packed in glass bottles. Washing Filling and capping are integrated in one machine. The bottle enters into the Washing part of three-in-one machine through belt conveyor. The gripper installed on the rotary disk catches bottle and turns it over 180 degrees and makes the bottleneck face ground. In the special Washing area, the nozzle on the gripper sprays water to rinse bottle in wall. The bottle that enters into the filler is switched by body holding plate. The filling valve acted by the cam can realize up and down. It adopts balanced pressure filling way. The filling valve opens and begins filling when the inner bottle pressure is balanced with inside liquid tank, the filling valve move up and leave the bottleneck when it finishes filling. The full bottle is transferred to the capping part through hold body transition poking wheel. The stop screwing knife holds the bottle neck, keeps bottle upright not rotating. The crown capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, discharging through the action of the cam. The full bottle is transferred to bottle outlet conveyor to the next process through poking wheel.

Rinser part:
1. Except the down framework, the transmission parts and some parts that must be made of special materials. Other parts are all made of stainless steel 304. 2. The roller bearing is made of stainless steel, the sealing ring is made of EPDM material, and plastic is made of UMPE.  3. The gripper is made of stainless steel, the position where hold the bottleneck is made of food standard rubber; 4. The gripper equipped with high-efficient spray nozzle, it can develop to any position of inwall of the bottle, and can save Washing water. There is a cover above the spray nozzle which can prevent water spilling; and there are regulatory recycle slot and recycle pipes under the nozzles. 5. Washing time can be guaranteed for 4 seconds. 6. By adjusting the height of the rotary parts to adapt for different bottle height 7. The motivation is driven from the driven system in the framework passed by gear. 8. The supplying of Washing water is controlled by solenoid valve 9. The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves Washing water. 10. The rinser is driven by driving system positioned inside machine frame via gear transmission. 11.   Rinser using high-strength stainless steel bottles of spring-loaded folders, to ensure a stable reversal of the glass bottles. The nozzle is a plum-like structure can wash every corner of the side wall and bottom to make the bottle clean.

 

Model	CGF8-8-3	CGF12-12-4	CGF18-18-6	CGF24-24-8	CGF32-32-10	CGF40-40-12
Capacity	2000B/H 500ml	4000B/H 500ml	6000B/H 500ml	10000B/H 500ml	15000B/H 500ml	20000B/H 500ml
Washing station	8	12	18	24	2	40
Filling station	8	12	18	24	32	40
Capping station	3	4	6	8	10	12
Bottle size	Neck :φ20-50mm:Height:150-320mm;
Filling way	Normal pressure filling
Water Pressure	0.18-0.25Mpa
Automatic mode	Automatic with PLC touch screen
Main material	SUS304
Water consumption	1000kg/h	1500kg/h	2000kg/h	3000kg/h	3500kg/h	4000kg/h
Filling precision	≤+5MM
Air pressure	0.5Mpa
Air consumption	0.3-0.6m3/min
Power	4kw	6kw	8kw	10kw	12kw	14kw
Weight	1800kg	2500kg	3500kg	4500kg	6500kg	8500kg
Dimension(L*W*H)	1800*1600*2100 mm	2100*1900*2300 mm	2800*1900*2300 mm	3050*2100*2300 mm	3800*2200*2300 mm	4600*2200*2300mm
We can do more bigger capacity as your need.

We can provide professional filling machine and packaging machine. Can meet your mass production.