Fully Automatic Capsule Filling Machinery for Hard Empty Capsules

• Customization: Available
• After-sales Service: Online Support,video Technical Support
• Certification: CE
• Model NO.: NJP5000C
• Customized: Customized
• Fill Range: Powder
• Filling Principle: Peristaltic Pump Filling
• Machine Type: Capsule Filling Machine
• Main Material: Stainless Steel
• Voltage: 220V
• Warranty: 1 Year
• Machine Weight: 3500kg
• Filling Error: ±2.5%-±3.5%
• Feature: High Speed Fully Pharmaceutical
• Dust: 29kpa 318m3/H
• Transport Package: Standard Wooden Case Packing
• Specification: 1605mm*1285mm*2127mm+(60-125)mm
• Trademark: SINOPED
• Origin: China
• Production Capacity: 300, 000 Capsules Per Hour

Product Description

Product Description

NJP-5000 full-automatic capsule filling machine, this model is suitable for large production of special equipment, the company absorbs foreign advanced technology, take its essence, but also adapt to the national conditions of reasonable improvement and innovative design.

Application

 

Product Parameters

Output	300,000 capsules / hour
Machine weight	3500KG
Machine  Dimensions	1605mm*1285mm*2127mm+(60-125)mm   (Excluding external electric control cabinet)
Power Supply	380/220V   50Hz
Motor power	Motor 4.4KW Vacuum 4KW Vacuum 4KW
No.of segment  bores	36 (three rows)
Vacuum	The pumping rate is 120m3/h,-0.03~-0.05Mpa
Dust	29Kpa  318m3/h
Noise	<85DB(A)
Making rate	Empty capsule 99% full capsule 98% or more
Suitable for  Capsule	000,00.0,1,2,3,4.5#
Filling error	±2.5%-±3.5%

Description of performance characteristics:

1. Adopting 3 row 36 die holes and 12 station design, it has become a new high technology equipment with high efficiency.

2,Using RU180 with RU140 high-precision space at a reasonable choice for me, completely guarantee the stability of machinery and life.

3,Improve the transmission cam of all stations, use high-quality special steel to make inner groove wheel transmission, eliminate the drawbacks of spring pulling easy fatigue and fracture, and wear-resistant, stable operation.

4, adopt the second generation totally enclosed turntable design. The upper die adopts two shafts to move up and down circumferentially, and imported silica gel seals to reduce the powder feeding into and out of the rotary table; the lower die adopts two shafts to move in and out circumferentially, matched with imported rubber seals to reduce the situation of powder feeding due to the back and forth expansion of the moving shaft, and it is stable and has high precision; the double shafts are made of a press cover, easy to disassemble and assemble, easy to clean, and the sealing ring is not changed. It is necessary to turn on the turntable to avoid cumbersome defects due to the dismantling of the turntable.

5,It adopts three dimensional control elements; and takes the undersurface plane of dosage as base, so as to eliminate the matural transmutation of the dosing disc and copper saucer, it is uniformity in interval and guarantees the accurate of filling weight, decreasing the phenomena of powder leak and dasy to clean, it's the special design at design at domestic (Patent Number 20042006795X).

6,Three rows of silicon rubber pads are used without air source and no dust bursts.

7,It adopts capsule vacuum positioning machanism to make the capsule
qualified over 98%.

8,Add the extra function of Capsule control switch.(Control the capsule outside of the machine: it's more safely and quickly).

9,Add the JOG control system,it's easier to operate and clean the machine.

10,The modular closed powder filling mechanism is adopted, which is easy to assemble and disassemble and easy to clean.

11,Using 10-inch color LCD screen, it can alarm automatically when it is short of capsule, powder, vacuum fault, loosening of machine door and so on.

12,The equipment has automatic timing refueling system.

13,The secondary dehumidification device of humidity in filling room was installed to solve the problem of poor dehumidification effect of filling workshop system and the operator's physical endurance limit.

14,The mold cleaning and blowing structure is added to solve the problem that the capsule is difficult to pull out because of the deposition of strong adhesive powder in the mold plane and cavity during production, and the probability of capsule loading is greatly improved.(selection)

15. Adopting a brand-new discarding device, inhaling and blowing are carried out simultaneously, which greatly increases the success rate of discarding waste capsules.

16.Equipped with hopper electric lifter, easy to assemble and disassemble, accurate positioning.

17. The flowing scraper plate is fastened on the metering plate and rotates with the metering plate, which greatly improves the fluidity of the powder in the powder storage ring. (selection)

18, The mechanical transmission part of the new layout design is replaced by the "inner cam" with the traditional "workbar" filling transmission mechanism to increase the filling force and make the machine run more quietly and smoothly. It is rare in the same class products.

19,Increasing multi-curved adjustable powder retaining structure and lateral oblique feed structure make the powder distribute uniformly in the powder storage chamber, flow direction is correct, flow velocity is smooth, and the loading precision is very accurate.