High Quality Pharmaceutical Medical Small Fully Auto Automatic Powder Pellets Hard Capsule Machine Filling Machine

• Customization: Available
• After-sales Service: Online Support,video Technical Support
• Certification: CE
• Model NO.: CFK1500C
• Customized: Customized
• Fill Range: Powder
• Filling Principle: Peristaltic Pump Filling
• Machine Type: Capsule Filling Machine
• Main Material: Stainless Steel
• Voltage: 220V
• Warranty: 1 Year
• Machine Weight: 1400kg
• Filling Error: ±2.5%-±3.5%
• Feature: High Speed Fully Pharmaceutical
• Dust: 20kpa 210m3/H
• Transport Package: Standard Wooden Case Packing
• Specification: 1230mm 1175mm 1955mm
• Trademark: SINOPED
• Origin: China
• Production Capacity: 90, 000 Capsules Per Hour

Product Description

Product Description

CFK-1500 full-automatic capsule filling machine is a newly developed full-automatic capsule filling machine which absorbs advanced technology from home and abroad. The equipment is beautiful, stable, low noise, convenient operation and superior performance. It is the best among the similar products.

Application

 

Detailed Photos

 

 

Product Parameters

Output	90,000 capsules per hour
Machine weight	1400Kg
Machine  Dimensions	1230mm*1175(+382)mm*1955mm
Power Supply	380/220V   50Hz
Motor power	Motor 2.2KW Vacuum 3KW Vacuum 2.2KW
No.of segment  bores	11 holes
Vacuum	Pumping rate 72m3/h,-0.03~-0.05Mpa
Dust	20Kpa  210m3/h
Noise	<85DB(A)
Making rate	Empty capsule 99% full capsule 98% or more
Suitable for  Capsule	000,00.0,1,2,3,4.5#
Filling error	±2.5%-±3.5%

CFK1500 automatic capsule filling machine

1. Adopting single row 11 die holes and 10 workstations design, it becomes the filling equipment with high production efficiency of single row punching die group in China.

2,The original double RU110 indexing box is adopted to make reasonable adaption. The stability and service life of the machine are greatly improved.

3,Improve the transmission cam of all stations, use high-quality special steel to make inner groove wheel transmission, eliminate the drawbacks of spring pulling easy fatigue and fracture, and wear-resistant, stable operation.

4, adopt the second generation totally enclosed turntable design. The upper die adopts two shafts to move up and down circumferentially, and imported silica gel seals to reduce the powder feeding into and out of the rotary table; the lower die adopts two shafts to move in and out circumferentially, matched with imported rubber seals to reduce the situation of powder feeding due to the back and forth expansion of the moving shaft, and it is stable and has high precision; the double shafts are made of a press cover, easy to disassemble and assemble, easy to clean, and the sealing ring is not changed. It is necessary to turn on the turntable to avoid cumbersome defects due to the dismantling of the turntable.

5,It adopts three dimensional control elements; and takes the undersurface plane of dosage as base, so as to eliminate the matural transmutation of the dosing disc and copper saucer, it is uniformity in interval and guarantees the accurate of filling weight, decreasing the phenomena of powder leak and dasy to clean, it's the special design at design at domestic (Patent Number 20042006795X).

6,A double row silicon rubber pad is adopted without air source and no dust bursts.

7,It adopts capsule vacuum positioning machanism to make the capsule
qualified over 98%.

8,Add the extra function of Capsule control switch.(Control the capsule outside of the machine: it's more safely and quickly).

9,Add the JOG control system,it's easier to operate and clean the machine.

10,The modular closed powder filling mechanism is adopted, which is easy to assemble and disassemble and easy to clean.

11,Using 10-inch color LCD screen, it can alarm automatically when it is short of capsule, powder, vacuum fault, loosening of machine door and so on.

12,The equipment has automatic timing refueling system.

13,The secondary dehumidification device of humidity in filling room was installed to solve the problem of poor dehumidification effect of filling workshop system and the operator's physical endurance limit.

14,The mold cleaning and blowing structure is added to solve the problem that the capsule is difficult to pull out because of the deposition of strong adhesive powder in the mold plane and cavity during production, and the probability of capsule loading is greatly improved.(selection)

15,The mechanical transmission part of the new layout design is replaced by the "inner cam" with the traditional "workbar" filling transmission mechanism to increase the filling force and make the machine run more quietly and smoothly. It is rare in the same class products.

16,Increasing multi-curved adjustable powder retaining structure and lateral oblique feed structure make the powder distribute uniformly in the powder storage chamber, flow direction is correct, flow velocity is smooth, and the loading precision is very accurate.

17, A lock bag cleaning device is added. When the lock bag device locks the capsule, the lock bag cleaning block works to remove the fine dust raised during the lock.

18,The newly designed powder feeding device has compact structure, convenient disassembly and assembly, and is easy to clean.