Easy to Replace and Clean Chinese Patent Medicine Powder Fully Automatic Capsule Filling Machine

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: NJP-3800D
• Type: Piston Filling Machine
• Automatic Grade: Automatic
• Material Type: Powder
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Multi-Room Feeding
• Dosing Device: Plunger
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Rotary
• Packaging: Box
• Packaging Material: Plastic
• Specifications and Models: Njp-3800d
• Maximum Output: 228, 000 Grains/Hour
• Machine Weight: 2, 200kg
• Machine Volume: 1, 395*1, 180*2, 260mm (with Automatic Powdering M
• Power Supply: 380/220V 50Hz
• Total Power: 10.5kw
• Number of Holes: 27 Holes
• Vacuum Degree: 63 M3/H
• Dust Suction: 24.5kpa 210m3/H
• Compressed Air: 12m3/H
• Water Source: Water Flow 1000L/H
• Applicable Capsules: 00#-5# Capsules
• Working Noise: 78dba
• Working Relative Humidity: 40-55%
• Capsule Loading Rate: Empty Capsule ≥99.9% Full Capsule ≥99.8%
• Transport Package: Export Wooden Box
• Specification: 2200KG
• Trademark: SINOPED
• Origin: Liaoning
• HS Code: 8422303090
• Production Capacity: 228, 000 Grains/Hour
• Package Size: 1395.00cm * 1180.00cm * 2260.00cm
• Package Gross Weight: 2200.000kg

Product Description

Product Description

 

The butterfly valve feeding method is adopted and equipped with a vibration device. It solves the problem that the traditional screw feeding device often fails to feed the powder with poor fluidity, such as Chinese herbal medicine and Chinese patent medicine. It is easy to disassemble and replace and clean.

 

It adopts guide rail transmission, with high precision and long service life. The closed design effectively prevents waste capsules and dust from entering. It has good stability, orderly sowing capsules and accurate adjustment.

 

It adopts one-piece processing and molding, with compact structure and no joint gap, good sealing and easy disassembly; the upper and lower modules move independently, and the fixed bracket shaft seal adopts double-lip skeleton dust ring, which achieves no noise, small size, small load and high precision. The fully enclosed rotary table is maintenance-free, oil-free, maintenance-free and powder-free for three years. Patent No.: (ZL 2015 2 1021530.0)

The modular design uses pin-type positioning of the filling clamp, which makes it easy to replace different filling rods without stopping the machine to adjust the filling amount during production. (Patent No.: ZL 2015 2 1021519.4)

The filling base adopts a negative pressure design, which can suck the powder in the base hole through negative pressure when the equipment is running, and recycle it into the powder collector. It effectively avoids the waste and loss of powder and realizes the secondary use of powder.

 

The new finished product discharging mechanism exclusively adopts the capsule clamping plate design. No external air source is required when discharging the finished capsules. There is no dust flying during the production process. At the same time, it effectively avoids the finished capsules from being mechanically clamped when discharging. The capsule clamping plate is made of aviation aluminum, which has strong permanent usability and low wear.

 

The slot-type locking plate has flexible adjustability and can be fine-tuned at any time without adjusting the workstation pull rod.

A soft sealing column is installed on the original suction seat. During the production process, the balance between the lower mold and the suction seat is automatically adjusted by the soft sealing column to prevent vacuum leakage, thereby improving the capsule separation rate.

The use of purified compressed air and intermittent gas impact technology solves the problem of drug powder sticking to the mold and improves the capsule filling rate.

The latest cam-down transmission system is adopted, the transmission bracket is designed to penetrate from top to bottom, and the running cams all use inner groove cams to replace the old outer cams, and the high-speed operation is precise, accurate, stable and noiseless.

 

Adopting negative pressure technology and independent drug powder diversion system, a small amount of drug powder leaking from the filling base and the drug powder in the integrated drug powder inhaler are diverted and recovered during the production process to ensure that the drug powder will not be cross-contaminated with the recycled waste capsules. The recovered drug powder can be directly put into the machine production again without disinfection.

Product Parameters

Specifications and models	NJP-3800D
Maximum output	228,000 grains/hour
Machine weight	2,200kg
Machine volume	1,395*1,180*2,260mm (with automatic powdering machine, height: 2,880mm)
Power supply	380/220V 50Hz
Total power	10.5kw
Number of holes	27 holes
Vacuum degree	63m3/h
Dust suction	24.5Kpa 210m3/h
Compressed air	12m3/h
Water source	Water flow 1000L/h
Water source requirements	Water ring vacuum pump with water tank for circulation, external water source can be connected
Working noise	78dBA
Working environment temperature	21° C± 3° C
Working relative humidity	40~ 55%
Capsule loading rate	Empty capsule ≥99.9% Full capsule ≥99.8%
Applicable capsules	00#-5# capsules
Filling accuracy	Western medicine ± 3% Chinese medicine ± 4%
Applicable filling range	Powder, granules, micro-pills, tablets
Special functions	Medicine powder collection Collector function
Material	Parts in direct contact with drugs are made of 316 stainless steel
Specification	Full symbol cGMP requirements

 

Dimensions

 

Our company