China Manufacturer Wholesale Continuous Automatic Rotary Tablet Press

• Customization: Available
• After-sales Service: Provide
• Warranty: 1 Year
• Model NO.: ZPT-15
• Type: Pressing Granulator
• Material: Stainless Steel
• Certification: CE
• Condition: New
• Model: Zpt15
• Punch & Die Type(EU): D
• Number of Dies: 15
• Max Diameter of Tablet (mm): 25
• Max Diameter of Abnormal Tablet(mm): 25
• Maximum Pre-Pressure (kN): 12
• Maximum Main Pressure (kN): 100
• Maximum Filling Depth (mm): 20
• Max Output (T/H): 70000
• Idle Load Noise dB(a): <75
• Power of Main Motor (Kw): 380V 50Hz 5.5kw
• Size of Machine (mm): 660*690*1620
• Net Weight of Machine (Kg): 675
• Trademark: SINOPED
• Production Capacity: 70000t/H

Product Description

Product Description

ZPT-15 Rotary Tablet Press

Machine Introduction:
ZPT15 Tablet Press Machine which totally meet GMP, ISO, and USA FDA requirement. This machine is very nice, decent, and easy to operate, especially the electrical control cabinet is independent from machine, which meet the requirement of FDA and CE, regarding to the safety of the operator.

Features:
1.  Small Size, Light Weight
2.  Less Punches, Fast Speed, The Rotating Speed is 77 circle/Min . Easy to change mould and cleaning .
3.  Adopt High speed punches, It can bear Big Pressure & wear-resisting in High speed .The Life is 10 times than Low Speed punches.
4.  PLC Control Systerm, All the Control can be operated Through HMI.
      Automatic Lubrication Systerm , Automatic Feeding Oil .
5.  Stainless steel main machine housing. 
6.  The contact Parts with powder is 316L. All the Cover is 304. The Rotary Cover is handled specially to make it varnish. According to GMP.
7.  There are special oil-leak proofs and dust proof devices installed in die holes.
8.  No-handwheel operating system 
9.  Sensor system - alarming first and then stopping machine when any one is happened as following situation.
A.  Without powder or pellet
B.  Open the plastic door
C.  Motor of Dust collector is overload  
D.  Inverter is in trouble
E.  Lack of lubrication
10.  Electrical control system. 
     A.  Rapidity display.
     B.  Alarm display. 
     C.  Main motor state display
11.  Alarm List
A.  Alarm when doors and windows are opened
B.  The upper punch too tight to alarm
C.  The lower punch too tight to alarm
D.  Lubricating oil is insufficient alarm
E.   Main pressure overload alarm
F.  The upper guide rail uninstalled alarm
G.  The lower guide rail uninstalled alarm
H.  Electric control switch alarm
I.   Main motor inverter alarm
G.  Feeding motor inverter alarm
K.  Too much powder filled with alarm
I.   Too little powder filled with alarm
M.  A single punch, lower limit out-of-tolerance alarm
N.  Continuous punch out-of-tolerance alarm protection function
O.  Lock of powder alarm

Specification

Main Technical Data

Model	ZPT15
Punch & die type(EU)	D
Number of dies	15
Max diameter of tablet (mm)	25
Max diameter of abnormal tablet(mm)	25
Maximum pre-pressure (KN)	12
Maximum main pressure (KN)	100
Maximum filling depth (mm)	20
Max output  (t/h)	70000
Idle load noise dB(A)	<75
Power of main motor (KW)	380V 50HZ 5.5KW
Size of machine (mm)	660×690×1620
Net weight of machine (kg)	675

 

Application

Pharmaceutical medicine and chemicals.


Detailed photos:

 

Precompression and
main pression


Forced feeding device