Precise and Compact Design Njp-3800c Fully Automatic Capsule Filling Machine

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: NJP-3800C
• Type: Piston Filling Machine
• Automatic Grade: Automatic
• Material Type: Powder
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Multi-Room Feeding
• Dosing Device: Plunger
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Rotary
• Packaging: Box
• Packaging Material: Plastic
• Specifications and Models: Njp-3800c Type
• Maximum Output: 228000 Grains/Hour
• Machine Weight: 2200kg
• Machine Volume: 1395*1180*2260mm
• Power Supply: 380/220V 50Hz
• Total Power: 10.5kw
• Number of Holes: 27 Hole S
• Vacuum: 63m 3 /H -0.04- -0.08MPa
• Vacuuming: 24.5kpa 210m³/H
• Compressed Air: Air Consumption12m³/H Pressure 0.3- 0.4MPa
• Working Noise: ≤78dba
• Working Tempera Ture: 21°c±3°c
• Working Rela Tive Humidity: 40-55%
• Chance: Empty Capsule ≥ 99.9%. Full Capsule ≥ 99.8%
• Adapt Capsules: 00#-5# Capsule
• Transport Package: Export Wooden Box
• Specification: 2200kg
• Trademark: SINOPED
• Origin: Liaoning
• HS Code: 8422303090
• Production Capacity: 228000grains/Hour
• Package Size: 139.00cm * 118.00cm * 226.00cm
• Package Gross Weight: 2200.000kg

Product Description

Product Description

 

It adopts disc valve feeding method and is equipped with a vibration device, which solves the problem of traditional spiral feeding device having no fluidity and often poor feeding of powders with poor fluidity such as Chinese herbal medicines and Chinese patent medicines. It is easy to disassemble, replace and clean.

 

It adopts guide rail transmission, with high precision and long service life. The closed design effectively prevents waste capsules and dust from entering. It has good stability, neat sowing and accurate direction adjustment.

 

One-piece processing, compact structure without joint gaps, good sealing, easy disassembly; upper and lower modules move independently, fixed bracket shaft seal adopts double-lip skeleton dust ring, achieving no noise, small size, low load, high precision. The fully enclosed rotary table is maintenance-free, oil-free, maintenance-free, and powder-free for three years. Patent number: (ZL 2015 2 1021530.0)

When the abnormal capsules cannot be separated normally, the powder entering the lower die hole is directly sucked into the powder recovery device of the filling station, which can effectively recover the powder and avoid loss and waste.

The filling clamp adopts a modular design and a pin-type positioning. There is no need to stop the machine to adjust the filling capacity during production, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4)

 

The filling base adopts a negative pressure design. When the equipment is running, the powder in the base hole can be sucked in by negative pressure and recovered into the powder collector, effectively avoiding the waste and loss of powder and realizing the secondary use of powder.

 

The slotted locking deck is flexible and allows fine-tuning of the DAT at any time without having to adjust the position lever.

The use of purified compressed air and intermittent gas impact technology solves the problem of powder adhering to the mold and improves the probability of capsule filling.

It adopts the latest cam transmission system, the transmission bracket runs through the upper and lower design, and all the operating cams use inner groove cams instead of the honest outer groove cams. The high-speed operation is precise, accurate, stable and noiseless.

 

The new finished capsule discharging mechanism exclusively adopts the capsule plate design. No external air source is required when discharging the finished capsule. There is no dust flying during the production process. It has strong permanent usability and less wear.

The dry vacuum pump has the following advantages: 1. The equipment has a very good silent effect during production. 2. The dry vacuum pump generates vacuum through the high-speed rotation of the eccentric vane, and the vacuum cleanliness meets the international (FTA) pharmaceutical gas standards. 3. The vacuum pump itself does not generate heat during continuous use and will not affect the temperature control of the GMP workshop. 4. The vacuum degree is highly sustainable and will not decrease due to long-term use. 5. The dry vacuum pump itself has an impurity filtration system, which is simple and convenient to clean.

Adopting negative pressure technology and equipped with an independent powder distribution system, the powder can be accurately recovered to avoid cross contamination. The recovered powder can be directly used for production again, which is convenient and efficient.

Equipped with automatic oil supply system for transmission mechanism, it can realize automatic oil supply at fixed time, fixed quantity and fixed point, keeping the transmission mechanism in lubrication state at all times, prolonging the service life of the equipment and reducing the wear of accessories.

 

Product Parameters

Specifications	NJP-3800C type
Maximum yield	228000 grains/hour
machine weight	2200kg
Machine volume	1395x1180x2260mm (height with automatic powder feeding machine: 2550mm)
power supply	380/220V 50Hz
total power	10.5kw_
Number of holes	27 holes
Vacuum_	63m/h -0.04~-0.08MPa
vacuuming	24.5 Kpa 210 m²/h
compressed air	Air consumption 12m*/h Pressure 0.3~0.4MPa
source of water	Water flow 1000L/h 0.3~0.4MPa
water requirements	The water ring vacuum pump and the water tank are recycled
working noise	≤78dBA__
Working temperature	21C+3ºC
working relative humidity	40-55%
Chance	Empty capsule≥99.9% Full capsule≥99.8%
Adapt Capsules	00#-5# capsule
Loading accuracy	Western medicine ±3% Chinese medicine± 4%
Adapt to the filling range	Powder,Granule,Pellet,Tablet
special function	Powder collector function
Material	316L stainless steel is used for parts in direct contact with medicines
specification	Fully sign cGMP requirements

 

Dimensions

 

Our company