Advanced Njp-800c Automatic Capsule Filling Machine for Pharma & Food

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: NJP-800C
• Type: Piston Filling Machine
• Automatic Grade: Automatic
• Material Type: Powder
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Multi-Room Feeding
• Dosing Device: Plunger
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Rotary
• Packaging: Box
• Packaging Material: Plastic
• Specifications and Models: Njp- 800c Type
• Maximum Output: 48000 PCS/Hour
• Machine Weight: 900kg
• Machine Volume: 1060*860*1990mm
• Power Supply: 380/220V 50Hz
• Total Power: 5kw
• Number of Holes: 6holes
• Vacuum: 40m 3 /H -0.04- -0.08MPa
• Vacuuming: 24.5kpa 210m³/H
• Compressed Air: Air Consumption5m³/H Pressure 0.3- 0.4MPa
• Working Noise: ≤75dba
• Working Tempera Ture: 21°c±3°c
• Working Rela Tive Humidity: 40-55%
• Chance: Empty Capsule ≥ 99.9%. Full Capsule ≥ 99.8%
• Adapt Capsules: 00#-5# Capsule
• Transport Package: Export Wooden Box
• Specification: 600kg
• Trademark: SINOPED
• Origin: Liaoning
• HS Code: 8422303090
• Production Capacity: 48000grains/Hour
• Package Size: 106.00cm * 86.00cm * 199.00cm
• Package Gross Weight: 900.000kg

Product Description

Product Description

 

It adopts disc valve feeding method and is equipped with a vibration device, which solves the problem of traditional spiral feeding device having no fluidity and often poor feeding of powders with poor fluidity such as Chinese herbal medicines and Chinese patent medicines. It is easy to disassemble, replace and clean.

 

Driven by guide rail, it has high precision and long service life. The closed design effectively prevents waste capsules and dust from entering. Good stability, orderly seeding, and accurate direction adjustment.

 

One-piece processing and molding, compact structure and no splicing gap, with good sealing and easy disassembly; the upper and lower modules move independently, and the shaft seal of the fixed bracket adopts a double-lip skeleton dust-proof ring, which achieves no noise, small size, and low load. Small and high precision. The interior of the
fully enclosed rotary table is free of maintenance, oil, maintenance and powder for three years. Patent No.: (ZL 2015 2 1021530.0)

Modular design is adopted, and the pin-type positioning of the filling holder is used. During production, there is no need to stop the machine to adjust the filling capacity, and it is convenient to replace different filling rods. (Patent No.: ZL 2015 2 1021519.4)

The filling base adopts a negative pressure design, which can suck the powder in the hole of the base through negative pressure when the equipment is running, and recycle it into the powder collector. Effectively avoid the waste and loss of the powder, and realize the
secondary use of the powder.

 

 When the abnormal capsule cannot be separated normally, the medicine powder entering the hole of the lower die is directly sucked into the medicine powder recovery device by the medicine powder recovery device at the filling station, which can effectively recover the medicine powder and avoid loss and waste.

 

The slot-type lock capsule plate has flexible adjustability and can be fine-tuned at any time without adjusting the station pull rod.

A soft sealing column is installed on the original suction seat, and the balance between the lower mold and the suction seat is automatically adjusted by the soft sealing column during the production process to prevent vacuum leakage and increase the rate of capsule separation.

Adopting negative pressure technology, equipped with an independent distribution system for drug powder, it can accurately recover drug powder and avoid cross-contamination. The recovered drug powder can be directly re-produced, which is convenient and efficient

  

Product Parameters

Specifications	NJP-800C type
Maximum yield	48000 pcs/hour
machine weight	900kg
Machine volume	1060x860x 1990 mm ( height with powder feeder: 2400mm)
power supply	380/220V 50Hz
total power	5kw
Number of holes	6holes
Vacuum_	40m ³/h -0.04 ~-0.08MPa
vacuuming	24.5Kpa 180 m²/h
compressed air	Air consumption 6m*/h Pressure 0.3~0.4MPa
source of water	Water flow 500L/h 0.3~0.4MPa
water requirements	The water ring vacuum pump and the water tank are recycled
working noise	≤75BA
Working temperature	21C+3ºC
working relative humidity	40-55%
Chance	Empty capsule≥99.9% Full capsule≥99.8%
Adapt Capsules	00#-5# capsule
Loading accuracy	Western medicine ±3% Chinese medicine± 4%
Adapt to the filling range	Powder,Granule,Pellet,Tablet
special function	Powder collector function
Material	316L stainless steel is used for parts in direct contact with medicines
specification	Fully sign cGMP requirements

 

Dimensions

 

Our company